Recommended Products
Fiber Optic, Fiber Tools & Test Equipment
FN20-OPM Mini Optical Power Meter 4-in-1 with Visual Fault Locator & RJ45 Tester
-17%
Fiber Optic, Fiber Tools & Test Equipment
FN20-OPM Mini Optical Power Meter 4-in-1 with Visual Fault Locator & RJ45 Tester
|
Wavelength range
|
800~1700nm
|
|
connector
|
Universal connector FC/SC/ST
|
|
Connector type
|
TnGaAs
|
|
Measuring range
|
Type A: -70~+6 Type B: -50~+26
|
|
Uncertainty
|
±5%
|
|
Standard wavelengths(nm)
|
850、980、1300、1310、1490、1550、1625、1650
|
|
Display resolution
|
Linear display: 0.1% Logarithmic display: 0.01dBm
|
|
650nm Red Light Source (Option)
|
1mw/10mw/20mw/30mw/50mw
|
|
Operating temperature
|
-10~+60℃
|
|
Storage temperature
|
-30~+70℃
|
|
Automatic shutdown time
|
10min
|
|
Continuous working hours
|
=72h
|
|
Electricity
|
2 x No. 7 battery/rechargeable lithium battery (option)
|
|
Gauge net weight
|
140/150g
|
SKU: THZ-049
Network Products, Routers, Tenda Routers
Tenda AC6 v5.0 AC1200 Smart Dual-Band Wi-Fi Router
Wireless
Wireless Standards
IEEE 802.11ac/a/n @5GHz
IEEE 802.11b/g/n @2.4GHz
IEEE 802.11b/g/n @2.4GHz
Data Rate
5GHz: Up to 867Mbps
2.4GHz: Up to 300Mbps
2.4GHz: Up to 300Mbps
Frequency
Simultaneous dual band 2.4
Transmit Power
CE:
<20dBm(2.4G)
<23dBm(5G)
FCC:
<30dBm
<20dBm(2.4G)
<23dBm(5G)
FCC:
<30dBm
Basic Features
SSID Broadcast: Enable/Disable
Transmission Power: high, medium, low
Beamforming
MU-MIMO
Transmission Power: high, medium, low
Beamforming
MU-MIMO
Wireless Security
WPA-PSK/WPA2-PSK, WPA/WPA2
Wireless Security: Enable/Disable
WPS(WiFi Protected Set-up) fast encryption
Wireless Security: Enable/Disable
WPS(WiFi Protected Set-up) fast encryption
SKU: THZ-048
Cudy, Network Products, Routers
Cudy WR1200 AC1200 Dual-Band Wi-Fi Router
Actual wireless data throughput will vary as a result of network conditions, client limitations, and environmental factors including building layout, obstacles, and client location.
Actual performance for multiple devices may be affected by the types of applications used, the total available bandwidth, and the capabilities of your devices. Connecting older Wi-Fi devices (legacy standards) may reduce overall efficiency. Additionally, using efficiency features requires compatible client devices that also support those features. Find more information about supported efficiency features in the software section of the Specs spreadsheet.
The wireless coverage claim serves as a reference only. Coverage performance will vary due to environmental factors including building layout, obstacles, traffic volume and density, and device location. For optimal coverage, please place the device in a central location within the area requiring Wi-Fi.
SKU: THZ-038
Fiber Accessories, Fiber Optic
Fiber Optic Splice Protection Sleeves 60 mm (100 pcs)
About this item
OD 2.5mm after recovery,length 60mm. Easily use and avoid any damages to the optical fiber during installation
Clear sleeve make it easy to detect splice before shrinkage
Airproof configuration keeping the splice point’s good resistance of humidity and temperature
Strength member is made from “Full hard” stainless steel of 304 grade and is ground at the edges before polishing to make it completely burr free to avoid rupturing during shrinking. 304 grade gives better corrosion resistance, even in coastal environment. Resistant to heat shocks, no cracking dripping or flowing
No drop needle, fast to pick up. very easy to operate.
SKU: THZ-037
Accessories, Adapters, CCTV & Security Cameras
VGA Extender over RJ45, up to 60 m (VGA-EX-60M)
The VGA-EX-60 extender enables the VGA signal transmission for distance up to 60 m via FTP cable. The transmitter converts the VGA signal, what enables its transmission via twisted-pair cable.
The transmitter and receiver are sold as a set and a both devices need to be used for complete channel transmission.
SKU: THZ-020
Shop
Showing 49–72 of 220 results
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Fiber Accessories, Fiber Optic
Fiber Optic Splice Protection Sleeves 60 mm (100 pcs)
About this item
- OD 2.5mm after recovery,length 60mm. Easily use and avoid any damages to the optical fiber during installation
- Clear sleeve make it easy to detect splice before shrinkage
- Airproof configuration keeping the splice point’s good resistance of humidity and temperature
- Strength member is made from “Full hard” stainless steel of 304 grade and is ground at the edges before polishing to make it completely burr free to avoid rupturing during shrinking. 304 grade gives better corrosion resistance, even in coastal environment. Resistant to heat shocks, no cracking dripping or flowing
- No drop needle, fast to pick up. very easy to operate.
SKU: THZ-037 -
